# Can moflowcli or other method be used to scan the pumping speed parameter?

**URL:** <https://molflow-forum.web.cern.ch/t/can-moflowcli-or-other-method-be-used-to-scan-the-pumping-speed-parameter/701>\
**Category:** General discussion\
**Tags:** molflow, linux\
**Created:** [June 10, 2025, 8:55am UTC](https://molflow-forum.web.cern.ch/t/can-moflowcli-or-other-method-be-used-to-scan-the-pumping-speed-parameter/701 "2025-06-10T08:55:13Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![sammylvp](https://molflow-forum.web.cern.ch/letter_avatar_proxy/v4/letter/s/3bc359/32.png) [@sammylvp](https://molflow-forum.web.cern.ch/u/sammylvp)\
**Post date:** [June 10, 2025, 8:55am UTC](https://molflow-forum.web.cern.ch/t/can-moflowcli-or-other-method-be-used-to-scan-the-pumping-speed-parameter/701/1 "2025-06-10T08:55:14Z")

</div>

I want to model a UHV chamber system and find the best condition for the vacuum pumps, especially the right pumping speed, so I want to be able to scan the pumping speed parameter. I understand molflowCLI can scan parameters like outgassing rate, but I do not see an option for scanning pumping speed. I also check the xml file extracted from the zip file, but do not see a field for pumping speed for a facet, either. So I am thinking this pumping speed parameter may be an “on-the-fly” one that will take effect during the montecarlo simulation. Before I dived (and got confused by) into the detailed algorithm of molflow, I want to ask a quick question here for suggestions and comments. Many thanks!

Sam

---

<div class="post-metadata">

**Author:** ![maarton](https://molflow-forum.web.cern.ch/letter_avatar_proxy/v4/letter/m/e5b9ba/32.png) [@maarton](https://molflow-forum.web.cern.ch/u/maarton)\
**Post date:** [June 10, 2025, 9:26am UTC](https://molflow-forum.web.cern.ch/t/can-moflowcli-or-other-method-be-used-to-scan-the-pumping-speed-parameter/701/2 "2025-06-10T09:26:39Z")

</div>

In the “algorithm behind Molflow” document that you mention, in section 2.5 there is the formula to convert between pumping speed and sticking factor:

![Screenshot 2025-06-10 at 11.25.18](https://molflow-forum.web.cern.ch/uploads/default/original/1X/7ea05558a3e29a82bc891320fea314b8108967d6.png)

You can extract the area, sticking factor, temperature and gas mass via Python and calculate the pumping speed that way for a facet.
